Home > VAT-Frame > It Helps to Complain and run a Blog.

It Helps to Complain and run a Blog.

October 21st, 2011

After 5 weeks I have received my CNC cut borosilicate glass for the VAT floor. If you want to read about it…Small post here

With the borosilicate I ordered 10mm soda-lime build base Z axis glass. Green glass compared to Borosilicate below:

It is clear why it is called “green” glass. Here are some more comparison shots 5.5mm Borosilicate vs 5mm soda-lime:

When I cleaned the borosilicate glass it was like looking through air! Amazing!

The glass was one of my major components. From here I can mount the VAT tilt, the Z Axis height and VAT tilt linear slide.

I also have some small resin samples ( 10ml ) coming in next week from Dymax.

I will experiment with the regular Soda lime vs Borosilicate and let you know.



Categories: VAT-Frame Tags: , , ,
  1. sinan
    October 30th, 2011 at 20:12 | #1

    I am closely following the work of my friend .. turkey … I did this machine had minor troubles … I’ll give you an idea … polished aluminum instead of glass, a better result if you use it you’ll be brought…If you have hotmail address can I mail out the product images….good luck

  1. No trackbacks yet.
Comments are closed.