Archive

Posts Tagged ‘stove top’

What Will Happen If I…

November 11th, 2011 2 comments

I know you have asked yourselves this question and the answer resulted usually you ended up in trouble, but maybe not this time.

I decided to check whether the polymerized resin will burn out or melt for casting purposes. I placed some Teflon film ( yes, I have it and will post about it ) on the Ceramic stove top burner. Placed the screw with a blob of resin and raised the temperature slowly.  @100 C -  I saw no change in the Teflon film other that it went soft, but it kept its properties. @120 C, 130 C, 150 C, 180 C, 200 C, same thing except the resin started to get soft when in contact with the teflon film. I broke a piece of the resin and set it on top of the film. Raised to 250 C – the teflon kind of melted and adhered to the ceramic( but was not hard to damage it by moving the piece of resin around ) and the resin started to change color to deep yellow.

Up to 300 C and the teflon is still holding and repelling the resin from ruining my ceramic counter top:

@380 – 400 I gave up since the resin changed color to almost black and no melting has occurred – it stayed the blob shape that I originally broke off.

Scraping the teflon with a putty knife made it into white plastic -like shavings.  It protected the stove top even at the higher temperatures so well that :

 

My wife is never going to know or suspect anything like the above ever happened in the kitchen!

Cheers!

 

Categories: Resin Tags: , , , , ,